BIOS User Interface Intel® Server Board S3420GP TPS
Revision 2.4
Intel order number E65697-010
70
Main
Advance
d
Security Server Management Boot Options Boot Manager
System Boot Timeout
<0 - 65535>
Boot Option #1
<Available Boot devices>
Boot Option #2
<Available Boot devices>
Boot Option #x
<Available Boot devices>
Hard Disk Order
CDROM Order
Network Device Order
►Delete Boot Option
EFI Optimized Boot
Enabled/Disabled
Boot Option Retry
Enabled/Disabled
Figure 32. Setup Utility – Boot Options Screen Display
Table 31. Setup Utility – Boot Options Screen Fields
Setup Item Options Help Text Comments
Boot Timeout 0 - 65535 The number of seconds the BIOS
should pause at the end of POST to
allow the user to press the [F2] key for
entering the BIOS Setup utility.
Valid values are 0-65535. Zero is the
default. A value of 65535 causes the
system to go to the Boot Manager
menu and wait for user input for every
system boot.
After entering the preferred
timeout, press the Enter key
to register that timeout value
to the system. These
settings are in seconds.
Boot Option #x Available boot
devices.
Set system boot order by selecting the
boot option for this position.
Hard Disk Order Set the order of the legacy devices in
this group.
Visible when one or more
hard disk drives are in the
system.
CDROM Order Set the order of the legacy devices in
this group.
Visible when one or more
CD-ROM drives are in the
system.
Floppy Order Set the order of the legacy devices in
this group.
Visible when one or more
floppy drives are in the
system.
Network Device Order Set the order of the legacy devices in Visible when one or more of
To Next Page
Loading...
Need help?
General
