Advisor Advanced ATSx500A User Guide 17
The Advisor Advanced menu
The Advisor Advanced system uses a menu structure to present the various
options and commands available. The availability of these depends on system
configuration and on the permissions in your user group. You may not always
see all the items described in this manual.
If you access the menu and do not press any key for three minutes, the system
time out function automatically exits from the menu. It is good practice to make
sure you exit the menu using the Clear button rather than this time out facility. If
someone else uses the menu before it times out, the options used will be logged
against your user account.
If you attempt to select an option that is not authorised in your user account, the
display shows the message:
Although you might be authorised to access a menu option, you might not be
allowed to access all the information it provides. You are only allowed to access
information for the areas assigned to your user account.
How the menu option sections are organised in this
manual
Menu options are numbered in the Advisor Advanced system. This numbering
system is also used in this manual, so menu option 1 “Inhibit zones” is topic
“1 Inhibit zones”.
The menu number also refers to the key sequence that can be pressed to enter
the menu. For example, if you want to enter menu “7.2 Walk test”, you can press
7, then 2 after entering the menu system.
Option availability
Not all options described below may be available. Option availability depends on
one of the following:
• Firmware version
• Panel model (for example, IP or non-IP model)
• Installed expansions (for example, wireless expander or GSM communication
module)
Accessing menu
Before commencing, ensure that the welcome or status screen is shown on the
display.
To Next Page
Loading...
Need help?
General
