Intermatic Grasslin talento smart B15 User Manual

97
EN
7. If astro correction is activated, select the desired setting and conrm with OK.
Possible settings for astro correction
Setting Effect
hh:mm
--
Correction is deactivated.
hh:mm
The switching command is only executed if sunrise takes place after the set time.
hh:mm
The switching command is only executed if sunrise takes place before the set time.
hh:mm
The switching command is only executed if sunset takes place after the set time.
hh:mm
The switching command is only executed if sunset takes place before the set time.
8. Select the specication of the desired astro correction setting and conrm with OK.
9. Set the day(s) of the week (⋀/⋁) on which the switching time should apply, and conrm with
OK.
The days of the week 1 – 5, 6 – 7 and 1 – 7 are set by default. Individual days of the week
can be set (+/-) under menu item “Select days”.
10. Select channel (+/-) for which the switching time is to be set, and conrm with
OK.
The channel selection is only displayed if there are two or more channels.
+ Active channel
– Inactive channel
11. To create a new switching time, select YES and conrm with OK.
12. Adopt the automatically suggested priority and conrm with
OK or adjust the priority.
You can only select a priority in advanced mode (Ä Chapter „Prioritising programmes“ on
page95).

Intermatic Grasslin talento smart B15 Specifications

General

Brand	Intermatic
Model	Grasslin talento smart B15
Category	Timer
Language	English