Intermatic Grasslin talento smart B15 User Manual

96
EN
Creating a new switching programme
PROGRAMMING AN ON COMMAND
Fig. 29: Programming command ON
1. Press the Menu button.
2. Select
Program and conrm with OK.
3. Select
New and conrm with OK.
ð The number of available programme memory slots is displayed briey (PXXX).
The number of available switching programme memory slots is displayed briey (dXXX).
4. In menu item
With Date?, specify whether the switching programme is to be programmed with a
date (Ä Chapter „Date-dependent/date-independent programming“ on page93).
5. Select function
ON and conrm with OK.
6. Enter the hours and minutes for the switch-on time (+/-) and conrm with
OK.
Variant-dependent: Instead of hours and minutes, you can also select sunrise (Sunrise) or
sunset (
Sunset). Sunrise and sunset is displayed as an additional alternative to the hours and
minutes.
Program
Menu
OK
New
OK
With Date?
Yes/No
OK
Select FNC
ON
OK
Channels
––
CH1
OK
Add
switching time?
Yes/No
OK
Priority
High
OK
Time
09:01
Hour
OK
Time
9:50
Minutes
OK
Days
12345--
Mon – Fri
OK

Intermatic Grasslin talento smart B15 Specifications

General

Brand	Intermatic
Model	Grasslin talento smart B15
Category	Timer
Language	English