65
Input voltage (AC) 115 Vac or 230 Vac 50/60Hz (select manually)
Degree of efficiency AC-DC 80%
Voltage supply Switch mode
Charging process Constant current, two levels of constant voltage
Battery application 24 V gel or AGM batteries (20 Ah ~ 60 Ah)
Output detection 1. Short-circuit detection
2. Output voltage/current limit
3. Protected against feedback
4. Overheating detection
Operating temperature 0 °C ~ 40 °C
Dimensions L x W x H 190 mm x 100 mm x 55 mm
Weight 965 g
Color Black
9.3.3 INSTRUCTIONS FOR USE
• Select the correct input voltage (115V/230V).
• Connect the battery charger to the charging socket of the electric vehicle using the charging plug (5).
• Connect the power cord. The POWER LED (2) will light.
• The charging process begins. During charging, the CHARGING LED (1) lights orange. When it changes
from orange to green, the vehicle is fully charged.
9.3.4 LED DISPLAY
POWER LED: GREEN LIGHT ON = Power on
CHARGING LED: ORANGE LIGHT ON = Charging
GREEN LIGHT ON = Fully charged
LIGHT OFF = Trickle charging
To Next Page
Loading...
Need help?
General