Ispring RO800 Series User Manual

www.123filter.com | (678) 261-7611 | support@123filter.com Page 14
▪ Malfunction Inspection
Malfunction
Possible Issue
Possible solution
No water output
Is the water inlet valve turned on?
Turn on the water supply
The filter was not installed correctly
Correct assemble the filter
The system is not connected to the
power
Check the power
Less water
output
The connection pipe is twisted or bent
Check the connections
The inlet valve opens too small
Open water inlet valve completely
Low temperature especially in winter
When the temperature decreased, the
water purified amount will decrease
accordingly, which is a normal
phenomenon
The filter exceeds its service life
Replace the filter
Long running
non-stop
Fitting's problem
Close the inlet valve and turn off the
power, contact with the
professional worker to deal with
Domestic
water cannot
be discharged
The drain is blocked
Close the inlet valve and turn off the
power, contact with the professional
worker to deal with
The filter exceeds its service life
Replace the filter
Smell in water
Long time no usage
The machine reproduces water for 20
minutes; make twice and then normal
usage
Leakage
in connections
The pipeline is not inserted
into the bottom of the quick connector
Reinstall the quick connector in the
correct way

Ispring RO800 Series Specifications

General

Brand	Ispring
Model	RO800 Series
Category	Water Filtration Systems
Language	English