IEEE488.2 Commands
Copyright ©ITECH Electronic Co., Ltd. 46
*RCL
This order can recall the parameter you saved before from the register.
Order syntax:
*RCL<NRf>
Parameter:
1~72
Example:
*RCL 3
Reference order:
*SAV
*TST?
This command is used to query the self-test by the instrument. 0 indicates that
self-test succeeds; other Arguments indicate self-test fails. In addition, in case
of failure, an error information will be generated to describe failure reason.
Query syntax:
*TST?
Parameters:
None
Returns:
<NR1>
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
