Quick Start
Copyright © Itech Electronic Co., Ltd. 15
Select the constant voltage mode and set the input
voltage value.
Select the constant resistance mode and set the
input resistance value.
Select the constant power mode and set the input
power value.
Enter the selected value or setting.
Turn on or turn off the input of the load.
The scroll up key is used to select the menu item.
The scroll down key is used to select the menu item.
Move the left and right keys to adjust the cursor to
the specified position when setting the value.
2.5 Combination Keys
Press [Shift] button first and then other keys to achieve all kinds functions in
the following table.
Start or stop the short circuit test.
Set the transient operation parameters.
Set the LIST operation parameters.
Store the parameter value of the currently load.
Including: voltage, current and power values, and
so on.
Displays the model number, version number, and
serial number of the electronic load.
Pressing this button during the running of the
automatic test indicates that the automatic test is
suspended.
Cause an immediate trigger.
Set detailed parameters in CC/CV/CW/CR mode.
Recall the load parameter values that have been
stored. Includes: voltage, current and power
settings, and so on.
Waiting for the trigger
signal.
To Next Page
Loading...
Need help?
General
