IVIEW NX-4 User Manual

NX-SERIES USER MANUAL
iView Technology
http://www.iviewtech.com
28
9 CONFIGURE ALARMS
9.1 Motion Detection
Set up properly, using motion detected recording will increase the number of days your NVR is able to
record. It will only record relevant events rather than recording everything, making searching for an event
easier. To set up motion detection:
1. Select the channel you’d like to configure.
2. Check the checkbox of Enable to enable Motion Detection.
3. Click the applicable Set button of Motion Detection to setup the motion detection area and
sensitivity for that channel.
4. Configure the schedule for motion detection. User can define when it’s armed or disarmed during
7x24.

IVIEW NX-4 Specifications

General

Brand	IVIEW
Model	NX-4
Category	Network Hardware
Language	English