2 GETTING STARTED
2.1 Starting and Shutting Down Your NVR
Proper startup and shutdown procedures are crucial to expanding the life of your NVR. To startup your
DVR, please plug the power supply into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the unit. The Power indicator LED on
the front panel should turn on, indicating the unit is receiving power.
To shutdown the NVR:
1. Enter the Shutdown menu, click on Menu > Shutdown.
2. Select the Shutdown button.
3. Click the OK button.
4. Unplug the power supply on the rear panel to safely shutting down the system.
2.2 Rebooting and Locking Your NVR
In the Shutdown menu, you may also reboot or lock your DVR. Locking your NVR will return you to the
To Next Page
Loading...
Need help?
General