USB DISPLAY ADAPTER USER MANUAL
54
out Jerky video playback for videos running in Full Screen Mode,.
- You may experience poor video performance on USB graphics
devices with low spec PC systems.
- Video rendering using hardware overlays is supported.
- Some DVD playback software packages do not support playing on a
second display adapter of any kind. You may try to open the media
player in the secondary display first before you start playing the DVD.
- Your PC may lack certain media codec to support the playback of
certain video formats. Please use the link below to install license free
media codec.
K- Lite: http://www.free-
codecs.com/download/K_Lite_Codec_Pack.htm
- Video/Media players have different decoding capabilities under
different display modes. For better performance watching DVDs or
certain video formats on the attached USB graphics display
attached, it is recommended to use the following license free
software:
Media Player Classic: http://sourceforge.net/projects/guliverkli/
Others
- Some graphics card, i.e. Intel, prevents other secondary graphics
chipset from being set as the primary card. As the result of this,
primary mode might not work or the display maybe disabled.
- If you have problems during the boot up process, start your
computer in Safe Mode and uninstall the driver. Hold the CTRL key
until the Windows startup menu appears and select Safe Mode.
- To verify the driver version that you installed, please click “Control
Panel” → “Add or Remove Programs” to check the program: USB
Display Device (j5create) 9.xx.xxxx.0159 (the number means the
driver version).
- Some limitation exists in different media player on file format support.
We enclose our compliance test result in the tables according to
different operating system, main system graphics card/chipset,
media players, and the supported media format. It will be updated
periodically with new version of media players or our latest driver.
To Next Page
Loading...
Need help?
General
