3
Turfcat
T628D
ASSEMBLY AND SETUP
1. STEERING WHEEL ATTACHMENT
– Attach the steering wheel to the shaft by lining up
hole R in steering wheel with hole in shaft.
– Insert roll pin.
TRACTOR ASSEMBLY
2. TRACTOR WHEEL ATTACHMENT
a) Attach the tractor wheels to the hubs.
b) Torque the front wheel bolts to 55 ft-lbs (75 Nm)
and the rear wheel lug nuts to 80 ft-lbs (108 Nm).
NOTE - Check lug nut torque after the first 10 hours
of use and adjust if not still within the initial range.
All references to "right" or "left" or
"front" or "rear" are with respect to an
operator in the tractor seat.
To Next Page
Loading...
Need help?
General
