EasyManuals Logo
Home>Jacobsen>Lawn Mower>LF Series

Jacobsen LF Series User Manual

Jacobsen LF Series
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
12 QUALITY OF CUT
en-83
12.7 STREAKS ________________________________________________________________
NOTE: Arrow indicates direction of travel.
A streak is a line of grass that is not cut. The cause of a
streak can be a damaged blade.
Probable Cause Remedy
The bedknife is damaged. Replace the bedknife.
The reel is damaged or is not worn equally. Inspect the reel. Replace the reel as needed.
Loose or missing bedknife screws Check and tighten the loose bedknife screws. Replace
any missing screws.
The mower turns at a rate that is faster than the mower
can turn and cut correctly. The cutting units do not
overlap around turns or on side hills.
Turn at a speed that will allow the cutting units to overlap.
Change the direction of cut or pattern on the side hills.
The tires compresses the grass before the grass is
cut.
Check and adjust the tire inflation pressure.
The mower compresses the wet grass before the
grass is cut.
Cut the grass when grass is dry.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacobsen LF Series and is the answer not in the manual?

Jacobsen LF Series Specifications

General IconGeneral
BrandJacobsen
ModelLF Series
CategoryLawn Mower
LanguageEnglish

Related product manuals