SPECIFICATIONS 2
4
2 SPECIFICATIONS
2.1 PRODUCT IDENTIFICATION _________________________________________________
946713 ............................Turfcat T628D 2WD with ROPS
946714 ............................Turfcat T628D 4WD with ROPS
Serial Number ................An identification plate, like the one
shown, listing the serial number, is
attached to frame behind and to
the left of the traction pedal.
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
2.2 KUBOTA D1105-E ENGINE __________________________________________________
Make................................Kubota
Model...............................D1105-E2B
Horsepower.....................26 hp (19.5 kW) @3000 rpm
Note: Actual sustained horsepower will likely be lower
than listed in specifications due to operating limitations
and environmental factors.
Displacement...................68.5 cu. In. (1123 cc)
Torque .............................52.7 ft lbs. (71.5 Nm) @ 2200 rpm
Fuel:
Type...........................No. 2 Low or Ultra Low Sulfur
Diesel
Rating........................Cetane Rating-45
Capacity ....................9 U.S. Gal. (34 liters)
High speed - rpm ............3150 no load
Low Idle - rpm ................. 1750 no load
Lubrication:
Capacity....................5.4 qt (5.1 liters)
Type ..........................SAE 10W30
API Classification .....CD,CE
Air Filter...........................Dry type with service indicator
Alternator ........................40 amp
Cooling System...............Liquid Cooled
2.3 CUTTING UNITS___________________________________________________________
Caster wheels.................. Two 11 x 4.5 pneumatic, tubeless
4 ply.
Weight Transfer ...............Spring transfer 180 lbs. (82 kg)
from cutting deck to mower
Blades/Decks ..................Fine-cut flail, rear discharge, side
discharge or mulcher
Cutting Width...................60 in. (1524 mm), 63 in. (1600
mm), or 72 in. (1829 mm)
Cutting Capacity @ 5.5 mph (9 kph)
60 in. (1524 mm).......3.3 acres (1.3 ha)/hr
63 in. (1600 mm).......3.5 acres (1.4 ha)/hr
72 in. (1829 mm).......4 acres (1.6 ha)/hr
Height-of-cut ...................1 to 4-3/4 in. (25 to 121 mm) in 1/4
in. (6 mm) increments
2.4 MOWER__________________________________________________________________
Tires
Front ..........................23 x 10.5-12 4 Ply
Rear...........................18 x 8.5-9 4 Ply
Pressure:.........................14 psi (97 kPa)
Battery:
Type...........................12 Volt Lead/Acid
Group ........................45 GMF
Parking Brake..................Mechanical front wheel drum
Speed:
Mow ..........................0 - 6 mph (9.6 kph)
Transport...................0 - 10 mph (16.1 kph)
Reverse..................... 0 - 3 mph (4.8 kph)
Hydraulic System:
Capacity..........................3 U.S. gal. (11.3 liters) System
Fluid Type........................ GreensCare 68
Return Filter....................Full Flow 10 micron
Steering ..........................Hydrostatic Power Steering
Mower Lift ....................... Hand operated, lever controlled
hydraulic lift system
CHARLOTTE, NC MADE IN U.S.A.
®
A Textron Company
To Next Page
Loading...
Need help?
General
