Jacuzzi Z Builder Series User Manual

Control Panel
The control panel is easy to use with fingertip control of all the spa's functions.
•
••
OFF
PROGRAM LIQUID CRYSTAL
DISPLAY
WARM TIME LIGHT
MODE COOL JETS BLOWER
I0IF
HEAT
STANDARD
FILTER 1
P
l
a
t
i
n
u
m
S
E
R
I
E
S
9
Temperature Controls: When
either of these buttons is pressed
once, the display will show the
temperature that has been set, in
addition to the words SET HEAT. Each time either of
these buttons is pressed again, the set temperature will
increase or decrease in increments of 1°F depending on
which button is pressed. After 3 seconds, the display will
automatically show the current spa water temperature.
Jets Control: Press this button once to
activate a jet pump on one side of the spa;
press it twice for both pumps to operate
simultaneously for maximum effect. Press it
a third time to turn off the jet pumps. This button does not
affect the filter pump operation which is an independent
function.
When the jet action mode is started with this button,
it will automatically stop after 30 minutes of operation.
Blower: Starts or stops the blower for
aeration in the spa. Blower operates in
all functions. The blower will also automati-
cally stop after 30 minutes of operation.
I0IF
HEAT
STANDARD
FILTER 1
Light: Press the button once to activate the
highest setting, again for the medium set-
ting and again for the lowest setting. A
fourth press of the button will turn the light
OFF. The lights automatically turn OFF
after 4 hours of operation.
Time: Press to display time of day, press
again to display temperature. Current spa
temperature display will automatically resume
after five seconds.
Program Function: Initiates time setting,
and panel lock routines.
Mode Function: Switches spa operation to
either the economy or standard mode. In the
economy mode, the spa will heat but only
when the water temperature is 20°F below the setpoint.
In the standard mode, the spa will heat as needed to
maintain the set temperature.
Liquid Crystal Display
Continually shows operating
status of the spa, as well as
the various monitoring func-
tions and programming infor-
mation.
OPERATION

Jacuzzi Z Builder Series Specifications

General

Brand	Jacuzzi
Model	Z Builder Series
Category	Hot Tub
Language	English