Page 7
ENGLISH
Wireless Handheld Remote | Installation and Operation Manual
SECTION 2. PRODUCT DESCRIPTION
This document gives instructions for
installing and operating the Jandy
®
AquaLink
®
Wireless Handheld
Remote. This includes complete
installation instructions and an
overview of the most common
remote functions.
If the Wireless Handheld Remote is
part of an AquaLink PDA system;
additional setup and programming
options are available from the
remote user interface (UI).
If the Wireless Handheld remote
is part of an AquaLink RS or Z4
system, setup and programming
will need to be performed from the
system UI. The Wireless Handheld
Remote can then be used to activate
and deactivate the equipment,
programs and settings.
For complete details please see:
AquaLink PDA manual H0572300
AquaLink RS OneTouch manual 6593
AquaLink Z4 manual H0386600
Copies can be obtained by visiting
www.zodiacpoolsystems.com or
by contacting technical support at
1-800-822-7933.
These instructions must be
followed exactly. Read through
the instructions completely before
operating the equipment.
2.1 BASIC FUNCTIONS
The Handheld Remote can be used
to activate and deactivate equipment
or features either
manually through
the EQUIPMENT ON/OFF menu or by
using the “Hotkeys”, buttons 1 or 2. See
section 4 for details.
2.2 REMOTE AND TRANSCEIVER J-BOX DIMENSIONS
1
1
/
16
"
4"
6"
1"
7"
Side View
(at Angle)
Top View
18-Channel RF Transceiver
R0686300
For AquaLink
®
20-Channel
Handheld Wireless Remote (P/N R0687300)
Technical Support
USA: 800.822.7933
AUS: 1800.688.552
3032401
FCC ID: RIR400121
IC: 10837A-400121
Rated: 10V DC
Input: 90 mA
MODEL NO. 8252
MADE IN CHINA
18-Channel RF Transceiver
R0686300
For AquaLink
®
20-Channel
Handheld Wireless Remote (P/N R0687300)
Technical Support
USA: 800.822.7933
AUS: 1800.688.552
3032401
FCC ID: RIR400121
IC: 10837A-400121
Rated: 10V DC
Input: 90 mA
MODEL NO. 8252
MADE IN CHINA
1
2
select
back
R0444300
1
/
2
"
3
/
4
"
3
7
/
8
"
6
Side ViewTop View
To Next Page
Loading...
Need help?
General
