16 Please see operator manual for full details.
Hydraulic Hitch Unlock Sequence (19c-1 PC only)
1
4
2
5
3
6
Start Unlock Process
Remove Attachment
Confirm Process
Change Attachment
Boom LED Indicator
Lock Quick Hitch
To start quick hitch unlock
process ensure hydraulics are
live then press quick hitch
sequence button (A).
Operate the machine to
engage
the jaw (A) with the
attachment
(B) and then full
crowd the attachment
to align latch.
To disengage the pivot pin,
crowd attachment for 3 seconds
then remove attachment.
To engage the lock on the quick
hitch press one of the following
two buttons and visually check
hitch is locked.
Instrument panel will indicate
need to confirm process (A).
To confirm process press 2 GO
button (B).
When the sequence is
confirmed the LED on the
boom will flash red (A).
A
A
A
B
B
A
Standard Attachments
To Next Page
Loading...
Need help?
General
