jcb 19C-1E Quick Reference Guide

Please see operator manual for full details.
1 2 3
4 5 6
To start quick hitch unlock
process ensure hydraulics are
live then press quick hitch
sequence button (A).
Start Unlock Process Confirm Process
Instrument panel will indicate
need to confirm process (A).
To confirm process press 2
GO button (B).
Boom LED Indicator
When the sequence is
confirmed the LED on the
boom will flash red (A).
Remove Attachment Change Attachment Lock Quick Hitch
To disengage the pivot pin,
crowd attachment for 3
seconds then remove
attachment.
Operate the machine to
engage the jaw (A) with the
attachment (B) and then full
crowd the
attachment to
align latch.
To engage the lock on the
quick hitch press one of the
following two buttons and
visually check hitch is locked.
Standard Attachments
HYDRAULIC HITCH UNLOCK SEQUENCE
19C-1E
A
A
A
A
B
A
17

jcb 19C-1E Specifications

General

Battery Type	Manganese laminated Lithium-ion
Battery Rated Capacity	14.8 kWh (3 Pack) 19.8 kWh (4 Pack)
Charging	On-board charger with direct connection from AC mains power supply
Charging Time	110V – 12 hrs 230V – 8 hrs
Fast Charging (Optional)	Off-board charger, with connection to 415V 3-Phase supply Charging time <2 hrs
System Voltage	48V
Motor Type	AC permanent magnet
Motor Power	7 kW continuous 20kW peak
Operating Modes	L – 1200rpm G – 1600rpm H – 1800rpm Auto Kick Up – 2300rpm, 2 speed tracking only
Thermal Limitations	Operation: -10oC to +46oC Charging: -10oC to +40oC