jcb 19C-1E Quick Reference Guide

1. Park the machine on solid, level ground
I. Release the two track levers
II. Set the hand throttle dial to the idle position
2. Lower the dozer blade
3. Lower the excavator so the attachment is flat on the ground
4. Discharge the hydraulic pressure (see aux venting operation)
5. Isolate the controls and remove power switch key
Please see operator manual for full details.
A – Attachment flat on the ground
B – Dozer blade lowered to ground
MAINTENANCE POSITION
19C-1E
Fig. 18
21

jcb 19C-1E Specifications

General

Battery Type	Manganese laminated Lithium-ion
Battery Rated Capacity	14.8 kWh (3 Pack) 19.8 kWh (4 Pack)
Charging	On-board charger with direct connection from AC mains power supply
Charging Time	110V – 12 hrs 230V – 8 hrs
Fast Charging (Optional)	Off-board charger, with connection to 415V 3-Phase supply Charging time <2 hrs
System Voltage	48V
Motor Type	AC permanent magnet
Motor Power	7 kW continuous 20kW peak
Operating Modes	L – 1200rpm G – 1600rpm H – 1800rpm Auto Kick Up – 2300rpm, 2 speed tracking only
Thermal Limitations	Operation: -10oC to +46oC Charging: -10oC to +40oC