INTENDED USE
NOTE:
Before using the
tool, read the the safety and
operating manual carefully.
INTENDED USE
The machine is intended for
cutting, roughing and brushing
metal and stone materials without
using water. For cutting metal, a
special protection guard for cutting
(accessory) must be used.
ASSEMBLY AND
ADJUSTMENT
MOUNTING THE
PROTECTIVE DEVICES
1. AUXILIARY HANDLE
The auxiliary handle MUST be
fitted all times.
Screw the auxiliary handle (3)
into the head of the machine
according to the working
method. (See
1
)
Warning!
Do not make any
alterations to the auxiliary
handle.
Do not continue to use
an auxiliary handle if it is
damaged.
MOUNTING THE GRINDING
DISC
Before any work on the machine
itself, pull the mains plug.
Grinding and cutting discs become
very hot while working; do not
1
To Next Page
Loading...
General