18
JCB-MS-210C
Instruction & User Manual
Installation of the dust bag
• Squeeze together the metal ring on the dust
bag (12) and attach it to the outlet opening
in the motor area.
Emptying the dust bag
• By pressing the metal ring wings of the
dust bag (12) together the dust bag can be
disengaged from the outlet opening.
• Open the zipper of the dust bag and shake
the contents into a dustbin.
• Close the zipper and install the dust bag on
the machine again as described.
Area of application
Intended application possibilities
The machine cuts:
• Wood and materials similar to wood
• Plastic
Unintended application possibilities
The machine is not suitable for:
• Ferritic materials, steel and cast iron, as well
as other material types which are not listed,
particularly food.
• Mitre saw without guard.
• Materials larger than the specified cutting
data:
90°/90°/ 120 x 60 mm
90°/45° 80 x 60 mm
45°/90° 120 x 33 mm
45°/45° 80 x 33 mm
To Next Page
Loading...
Need help?
General
