JCB-PW7532P
Instruction & User Manual
30
Troubleshooting
Symptoms Possible Causes Corrections
Water pressure is weak 1. Water supply is
restricted.
2. Water not turned on to
full power
3. Not using high pressure
nozzle
1. Inspect garden hose for
kinks or leaks. Make sure
you are using a large
enough garden hose
(min. ¾ inch diameter)
2. Open water source all
the way.
3. Change nozzle
Pump fails to produce
pressure or pressure is
inconsistent
1. Water supply is
restricted
2. Water not turned on full
power
3. Nozzle is clogged
4. Spray gun leaks
5. Air in line
6. Inlet hose screen is
clogged
7. Water supply is over
100°F 8. Pump is faulty
1. Inspect garden hose for
kinks or leaks. Make sure
you are using a large
enough garden hose
(Min. ¾ inch diameter)
2. Open water source all
the way.
3. Clean nozzle
4. Check spray gun
connection or replace
spray gun
5. Squeeze trigger handle
to remove air
6. Clean inlet
7. Use cool water supply
8. Contact service centre
To Next Page
Loading...
Need help?
General
