About the Product
Description
7 9831/5150-1 7
Waste Applications
The boom/arm should not be operated so as to punch the waste in order to compact it. To compact waste
the boom/arm can be used to exert pressure on the material, lowering the attachment onto the waste and
continuing to lower the boom so as to exert the weight of the machine on the material being compacted, but
without causing the stabilisers to be lifted clear of the ground. Excessively raising the machine above ground,
punching the waste, lifting the stabilisers clear of the ground during compacting and any other actions that
impart significant shock loads into the machine structure are outside of the intended use of the machine and
can have a damaging effect on the machine structure and hydraulic system.
The correct position of the stabiliser legs in waste compaction application is with the legs lowered so that the
wheels are lifted just clear of the ground, taking the weight off the wheels (not fully lowered so as to substantially
lift the machine).
The dozer blade must be raised clear off the ground where applicable during the correct compaction procedures
as outlined above.
(For: JS20 MH [T4F])
The machine is intended to be used in normal conditions for the applications described in this manual. If the
machine is used for other applications or in dangerous environments, for example in a flammable atmosphere
or in areas with dust containing asbestos, special safety regulations must be obeyed and the machine must
be equipped for use in these environments.
The machine is primarily designed for materials or scrap handling with an attachment, without movement of
the undercarriage during the work cycle. A normal work cycle comprises handling, elevating, slewing and
discharging of material.
The machine can be used for object or material/scrap handling/transportation if it meets the lifting regulations.
Refer to: Lifting and Loading (Page 142).
Waste Applications
The boom/arm should not be operated so as to punch the waste in order to compact it. To compact waste
the boom/arm can be used to exert pressure on the material, lowering the attachment onto the waste and
continuing to lower the boom so as to exert the weight of the machine on the material being compacted, but
without causing the stabilisers to be lifted clear of the ground. Excessively raising the machine above ground,
punching the waste, lifting the stabilisers clear of the ground during compacting and any other actions that
impart significant shock loads into the machine structure are outside of the intended use of the machine and
can have a damaging effect on the machine structure and hydraulic system.
The correct position of the stabiliser legs in waste compaction application is with the legs lowered so that the
wheels are lifted just clear of the ground, taking the weight off the wheels (not fully lowered so as to substantially
lift the machine).
Optional dozerblade on JS200 Wastemaster when fitted must be raised clear off the ground during the correct
compaction procedures as outlined above.
Log Moving/Object Handling
Do not use the machine to move or handle logs unless sufficient log protection is installed. You could cause
serious injury to yourself and damage to the machine. For more information, contact your JCB dealer.
Optional Equipment and Attachments
A wide range of optional attachments are available to increase the versatility of your machine. Only the JCB
approved attachments are recommended for use with your machine. Contact your JCB dealer for the full list
of approved attachments available.
To Next Page
Loading...
Need help?
General
