Maintenance
Maintenance Positions
58 9831/3200-3 58
Maintenance Positions
General
Make the machine safe before you start a maintenance procedure.
1. Park the machine on level, solid (slabbed/paved) ground.
2. Remove the machine key switch.
3. Disconnect the battery to prevent accidental operation.
4. Put the chocks on the side of all wheels.
Maintenance Position- Platform Raised
WARNING If a second person is involved with the operation ensure that the machine controls are not
operated whilst they are in the working envelope of the machine and attachment, otherwise the other person
could be killed or injured if a control is moved accidentally.
Make sure that the safety strut is installed before performing the maintenance task on raised platform.
When installing the upper safety strut always maintain three points of contact with ladder and scissor end bar.
Use scissor end bar as handrails.
To Next Page
Loading...
Need help?
General
