EasyManuals Logo

Jeep 2008 Wrangler User Manual

Jeep 2008 Wrangler
466 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #420 background imageLoading...
Page #420 background image
CAUTION!
When installing the Integrated Power Module
cover, it is important to ensure the cover is prop-
erly positioned and fully latched. Failure to do so
may allow water to get into the Integrated Power
Module, and possibly result in an electrical system
failure.
When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system over-
load. If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
corrected.
VEHICLE STORAGE
If you are leaving your vehicle dormant for more than 21
days you may want to take steps to protect your battery.
You may:
Remove Cartridge fuse #15 in the Power Distribution
Center labeled Ignition-Off Draw (IOD).
Store the removed IOD fuse in the Power Distribution
Center location #11 labeled “IOD Storage.”
Or, disconnect the negative cable from the battery.
Anytime you store your vehicle, or keep it out of
service (i.e., vacation) for two weeks or more, run the
air conditioning system at idle for about five minutes
in the fresh air and high blower setting. This will
ensure adequate system lubrication to minimize the
possibility of compressor damage when the system is
started again.
MAINTAINING YOUR VEHICLE 419
7

Table of Contents

Other manuals for Jeep 2008 Wrangler

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jeep 2008 Wrangler and is the answer not in the manual?

Jeep 2008 Wrangler Specifications

General IconGeneral
BrandJeep
Model2008 Wrangler
CategoryAutomobile
LanguageEnglish

Related product manuals