EasyManuals Logo

Jeep 2008 Wrangler User Manual

Jeep 2008 Wrangler
466 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #423 background imageLoading...
Page #423 background image
3. Turn the socket assembly 1/4 turn counterclockwise
and remove from housing. Pull the bulb straight from the
socket to replace.
Front Side Marker
1. Reach under the front fender flare and locate the front
side marker socket.
2. Turn the socket assembly counterclockwise 1/3 turn
and remove it from the housing. Pull the bulb straight
from the socket to replace.
Front Fog Light
1. Locate the front fog lamp in the front fascia, and
disconnect the electrical connector from underneath.
2. Turn the bulb 1/4 turn counterclockwise.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
Rear Tail, Stop, Turn Signal, and Backup Lights
1. Remove the two inboard screws attaching the tail light
housing to the body. DO NOT REMOVE THE OUTER
SCREWS AT ANY TIME.
422 MAINTAINING YOUR VEHICLE

Table of Contents

Other manuals for Jeep 2008 Wrangler

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jeep 2008 Wrangler and is the answer not in the manual?

Jeep 2008 Wrangler Specifications

General IconGeneral
BrandJeep
Model2008 Wrangler
CategoryAutomobile
LanguageEnglish

Related product manuals