Jeep WRANGLER 2021 User Manual

428 SERVICING AND MAINTENANCE
4. Then pull the carpet out to the rear and
open the carpet split around the front seats
brackets.
Pull Carpet To The Rear
5. When reinstalling carpet please perform
these steps in reverse order making sure
that the carpet is tucked under the scuffs,
B-pillar, console, and refasten grommets.
Cargo Carpet (Four Door Models):
1. Remove the grommets under the rear seat
(one left and one right).
2. Pull the carpet out to the rear and open the
carpet split around the seat belt
attachment.
Under Rear Seat
3. Remove the carpet under the load floor and
the side support and then pull the carpet out.
Rear Load Floor
4. When reinstalling carpet please perform
these steps in reverse order making sure
that the carpet is tucked under the scuffs,
B-pillar, console, and refasten grommets.
Cargo Carpet (Four Door Models) With Gap
Hider:
1. Remove the grommets under the rear seat
(one left and one right).
2. Pull the carpet out to the front and open the
carpet split around the seat belt attachment
and under the center seat bracket.
Under Rear Seat
1 — Carpet Split
2 — Rear Carpet
1 — Carpet Split
2 — Rear Carpet
1 — Side Supports
2 — Load Floor
1 — Carpet Split
2 — Grommets
3 — Rear Carpet
21_JL_OM_EN_USC_t.book Page 428

Jeep WRANGLER 2021 Specifications

General

Brand	Jeep
Model	WRANGLER 2021
Category	Automobile
Language	English