JEFF ROWLAND 125 User Manual

SPECIFICATIONS
Output Power
125 watts @ 8 ohms / 250 watts @ 4 ohms
500 watts @ 8 ohms BTL (bridge-tied load)
Frequency Response
5 Hz – 130 kHz, -3 dB
Dynamic Range
112 dBA (SE mode), 121 dBA (BTL mode)
Output Noise
80 µV A - weighted
Input Impedance
40k ohms
THD + Noise
0.008% @ 1 kHz
Damping Factor
> 1000 @ 1 kHz
Overall Gain / Bal. or Unbal.
28 dB (SE mode), 34 dB (BTL mode)
Common Mode Rejection Ratio
> 90 dB (20 - 20 kHz)
Absolute Phase Non-inverting
(XLR pin 2 hot)
Inputs
1 pair Balanced (XLR)
Outputs
1 pair parallel binding posts
Power Consumption Idle
14 watts
Power Consumption Standby
< 0.5 watts
Amplifier Weight
10.4 lb / 4.7 kg
Amplifier Dimensions (h/w/d)
2.7” x 13.7” x 7.5” / 68mm x 348mm x 190mm
REVA2

MODEL 125 STEREO AMPLIFIER

PAGE 14

JEFF ROWLAND 125 Specifications

General

Brand	JEFF ROWLAND
Model	125
Category	Amplifier
Language	English