Initial Inspection
I
nspect the shipping container for damage. If the shipping container,
packing material, amplifier or accessories are damaged or missing, notify
your dealer and the shipper (if a claim is to be made). Note: Many shippers
require notification and an inspection within twenty-four (24) hours of
delivery to ascertain the nature of damages incurred.
Your Synergy Preamplifier has undergone extensive performance evaluations,
listening tests, quality control inspections and a minimum seventy-two (72)
hour burn-in period prior to shipment and should be in a perfect operational
condition upon receipt. If the Preamplifier does not operate correctly, please
notify your dealer immediately.
We strongly suggest that you save all packing materials. If the Preamplifier
is returned to your dealer or Jeff Rowland Design Group, the original
packing materials must be used for shipment. Neither Jeff Rowland Design
Group nor the shipper can be held responsible for damages incurred
during transit if the original factory packing is not used. All factory returns
require that a Return Authorization number be issued by Jeff Rowland
Design Group prior to shipment.
Contents
E
nsure that all of the auxiliary components listed below are enclosed
within the accessory box. Refer to the diagrams illustrated above and
verify the components included.
1 Handheld remote transmitter
2 One (1) warranty card (in some countries warranties are provided by
the respective importer)
3 Four (4) XLR/RCA adapters (one pair male input adapters and one
pair female output adapters)
4 AC power cable
5 Eight (8) compliant isolation interface supports
6 DC power cable
Initial Inspection / Contents
To Next Page
Loading...
Need help?
General
