To Next Page

To Previous Page

MP1313

OPERATING INSTRUCTIONS

Power

Press the power button (1) or any other

button on the face of the receiver to turn the

unit on when the ignition switch is on. Press the

power button again to turn the receiver off. If

the radio was left on when the ignition was last

turned off, the receiver will turn on automatically

when the ignition switch is again turned on. If

the receiver was off when the ignition was last

turned off, the receiver must be turned on

manually when restarting the vehicle.

Source

Press the SRC button (2) to select a different

mode of operation as indicated on the display

panel. Available sources include Tuner, CD,

and Auxiliary Input. During CD player operation,

pressing SRC will change to the tuner source

without ejecting the disc. To access the

Auxiliary Input source, press the SRC button

until "AUX" is indicated in the display.

Volume

To increase the volume, turn the AUDIO

CONTROL (3) clockwise. To decrease the

volume, rotate the AUDIO CONTROL counter

clockwise. When volume is adjusted, the

volume level is shown on the display panel as a

number ranging from “00” (lowest) to “100”

(highest).

MP1313

LIFT

I D 3

Jensen CD1213 User Manual

Other manuals for Jensen CD1213