Jet JSG-6DC User Manual

6
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and
maintenance procedures for a JET Model JSG-6DC Belt/Disc Sander. This manual contains instructions
on installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. This machine has been designed and constructed to provide years of trouble free operation if
used in accordance with instructions set forth in this manual. If there are any questions or comments,
please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web
site: www.waltermeier.com.
Specifications
Model Number ....................................................................................................................... JSG-6DC
Stock Numbers:
Sander only..................................................................................................................... 708599
Sander with optional closed stand .................................................................................. 708598K
Sander with optional open stand ..................................................................................... 708599K
Belt Section:
Sanding Belt (L x W)(in.) ......................................................................................................48 x 6
Belt Table Tilt (deg.) ...................................................................................................... -20 to 45
Belt Table (L x W)(in.) .............................................................................................. 14-3/4 x 7-1/2
Miter Groove (in.) ............................................................................................................ 3/4 x 3/8
Belt Speed (SFPM)............................................................................................................... 2500
Belt Table Positive Stops (deg.)...................................................................................... 45 and 90
Disc Section:
Disc Diameter (in.).................................................................................................................... 12
Arbor Size (in.) ........................................................................................................................ 3/4
Disc Table Tilt (deg.) ..................................................................................................... -25 to 45
Disc Table (L x W)(in.) ................................................................................................... 16-1/2 x 9
Miter Groove (in.) ............................................................................................................ 3/4 x 3/8
Disc Speed (RPM)................................................................................................................ 1725
Disc Table Positive Stops (deg.) ..................................................................................... 45 and 90
Dust Port Diameter (in.)....................................................................................................................... 4
Dust Collection Recommended Minimum Capacity (CFM) ................................................................. 450
Motor ........................................................................... TEFC Induction (Capacitor Start), 1-1/2HP, 1PH,
115/230V (pre-wired 115V), 12.8/6.2A, 60Hz
Overall Dimensions:
with Belt Arm Horizontal (L x W x H/in.) ......................................................................... 35 x 22 x 18
with Belt Arm Vertical (L x W x H/in.) ........................................................................ 35 x 22 x 34-1/2
Footprint (in.) ................................................................................................................. 18-1/2 x 15
Approximate Weight (Net/Shipping)(lbs.) ....................................................................................215/229
Accessory Stands:
Approximate Weight of Open Stand (Net/Shipping)(lbs.)................................................................. 25/28
Approximate Weight of Closed Stand (Net/Shipping)(lbs.) .............................................................. 55/61
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.

Jet JSG-6DC Specifications

General

Brand	Jet
Model	JSG-6DC
Category	Sander
Language	English