17
STORAGE
If you plan on storing your Jetson Beam for a substantial amount of time,
please do the following:
• If the ambient temperature of your storage area is below 32 degrees
Farenheit, please do not charge. You should bring the scooter into a warm
environment (above 50 degrees Farenheit) for charging.
• To prevent dust, cover the Jetson Beam when storing.
• Store the Jetson Beam indoors, in a dry and suitable temperature.
• Do not leave the Jetson Beam plugged into the charger for long periods of
time.
MAINTENANCE
The Jetson Beam was assembled by professional technicians. Any attempt to
independently x or change the Jetson Beam or parts of it in any way, can
cause damage to the Jetson Beam folding electric scooter, and can cancel the
manufacturer warranty given upon delivery. Please contact your authorized
Jetson dealer, or Jetson’s customer service for any maintenance needs.
Inserting an object into openings or in the battery can cause electrical shock,
injury, burns or re. Any attempt to open the battery case will damage it and
cause release of dangerous toxic substances. Unplug the Jetson Beam from
the outlet before performing any maintenance. Carry the Jetson Beam accord-
ing to all applicable local and national requirements.
PROTECTION AGAINST OVER-DISCHARGING
The Jetson Beam has a built-in smart over-discharging protection system that
will actively cut off the power when the scooter is in a locked or shutdown state
and battery power is too low. Once the scooter goes into the over-discharging
protection mode, it needs to be awakened by charging. If the scooter remains
un-awakened after 30 minutes of charging, please contact the authorized
dealer of the Jetson Beam, or Jetson’s customer service.
JETSON BEAM CARE AND MAINTENANCE
To Next Page
Loading...
Need help?
General
