9
TURNING YOUR JETSON BEAM SCOOTER ON AND OFF
To turn your Jetson Beam Scooter on, place one foot on scooter and kick off
with your other foot to put it in motion, while simultaneously holding down the
thumb throttle (on right side of handlebar) for 5 seconds.
To turn your Jetson Beam Scooter off, make sure scooter is not in motion, then
press the thumb throttle and electric brake (on left side of handlebar) down
simultaneously.
TURNING HEADLIGHT ON/OFF
When parking your Jetson Beam, press and hold e-brake down for 3 seconds.
This will turn your headlight off. Pressing and holding the e-brake for 3 seconds
can turn your headlight back on.
Hold e-brake down
for 3 seconds to turn
headlight on and off
Press e-brake and thumb throttle
simultaneously to power off
DISPLAY SCREEN
The LCD display screen is an interface that shows the battery life, speed, and
Bluetooth connectivity of your Jetson Beam while in operation.
OVERVIEW
To Next Page
Loading...
Need help?
General
