T600HPx-4 and T600HPx-4+PIR Series Heat Pump Thermostat Controllers Installation Instructions18
Setting the Day and Time (T600HPP-4 and
T600HPP-4+PIR Models)
Upon initial powerup (or after a power loss of greater
than 6 hours), a SetClock alarm appears on the
thermostat controller display. As the thermostat
controller scrolls through the Status Display Menu, the
SetClock alarm message causes the backlight to light
up until the clock is set.
When changing the time, press and release the
UP/DOWN arrow keys once to change the time in
1-minute increments; press and hold down the keys to
change the time in 30-minute increments.
To set the clock while in the Main User Menu:
1. Press the NO key for all prompts until the clock set
prompt appears on the display. Press the YES key
to enter the clock set menu.
2. Press the YES key to set the time or press the
NO key to advance to the day set menu.
3. Press the UP/DOWN arrow keys to adjust the time.
When the correct time is displayed, press the
YES key to store the time.
4. Press the YES key to enter the day set menu or
press the NO key to enter the clock format menu.
Press the YES key to copy the
schedule from the previous day.
Press the NO key to set a different
schedule.
If the YES key was pressed, the next
prompt is for Wednesday. Repeat the
procedure for all days of the week.
After setting the schedule for all the
days of the week, following the last
entry for Sunday, press the YES key
to return to the Status Display Menu
or press the NO key to start again at
Monday.
Table 6: Programming the Daily Schedule –
Four-Event (Part 2 of 2)
Thermostat
Controller
Display
Description
Cop
Y/N
Wednesda
Exit?
Table 7: Four-Event Office Schedule
Event
Event 1 Event 2 Event 3 Event 4
Occupied Unoccupied Occupied 2 Unoccupied 2
Cool Heat Cool Heat Cool Heat Cool Heat
72°F
(22°C)
70°F
(21°C)
80°F
(27°C)
62°F
(17°C)
72°F
(22°C)
70°F
(21°C)
80°F
(27°C)
62°F
(17°C)
Monday 7:00 A.M. 5:00 P.M.
12:00 P.M.
1
12:00 P.M.
1
Tuesday 7:00 A.M. 5:00 P.M.
12:00 P.M.
1
12:00 P.M.
1
Wednesday 7:00 A.M. 5:00 P.M.
12:00 P.M.
1
12:00 P.M.
1
Thursday 7:00 A.M. 5:00 P.M. 7:00 P.M. 10:30 P.M.
Friday 7:00 A.M. 5:00 P.M. 7:00 P.M. 10:30 P.M.
Saturday
12:00 P.M.
1
12:00 P.M.
1
12:00 P.M.
1
12:00 P.M.
1
Sunday
12:00 P.M.
1
12:00 P.M.
1
12:00 P.M.
1
12:00 P.M.
1
1. Programming different events to the same time for that day cancels those events and leaves the thermostat controller in the
Unoccupied state.
To Next Page
Loading...
Need help?
General
