TEC3000 Series On/Off or Floating Fan Coil and Individual Zone Thermostat Controllers with Dehumidification
Capability Installation Instructions
15
Unit Power
On
Off
Powers the thermostat controller on or off.
Note: This icon disables all equipment control, but does not physically power
down the unit.
Network Communication
Indicates that the thermostat controller detected a supervisory controller and both
are online.
Arrow
Increases or decreases a value depending on the configuration screen.
Run/Hold
Displays the current setpoint. Hold mode is enabled by pressing the button.
No Hold/Hold
Displays the current setpoint. Hold mode is not enabled.
Hold/Hold
Displays the active setpoint. Hold mode is not enabled.
Right Arrow
Proceeds to the next screen.
Fan Overrides for
Single-speed Fans
On
Auto
Quiet
Adjusts the fan override between On, Auto, and Quiet for single-speed fans.
Fan Overrides for
Variable-speed Fans
On
Auto
Quiet
Adjusts the fan override between On, Auto, and Quiet for variable-speed fans.
Table 3: Touchscreen Icons (Part 2 of 3)
Icon Icon Name Description
To Next Page
Loading...
Need help?
General
