Johnson Controls TEC3000 Series User Manual

TEC3000 Series Networked and Wireless Proportional Fan Coil and Individual Zone Thermostat Controllers with
Dehumidification Capability Quick Start Guide
14
Unit Power
On Standby
Powers the thermostat controller on or off.
Notes:
• This icon disables all equipment control
but does not physically power down the
unit.
• On the modern home screen, if the Unit
Power icon is in standby mode, the
temperature and humidity are also
displayed in standby mode to indicate
that control off or standby mode is
active.
Humidity
On Standby
Indicates the humidity reading.
Degree
On Standby
Indicates that the unit is set to degrees.
Network Communication (for Networked Models)
Network communication No Signal
Network Communication icon indicates that
the thermostat controller detected a
supervisory controller and both are online.
No icon indicates that the thermostat
controller did not detect a supervisory
controller.
Radio Signal (For Wireless Models)
No Signal Low Signal Medium Signal High Signal
Indicates the strength of the radio signal.
Arrow Up Arrow Down
Increases or decreases the cooling value
on the home screen.
Arrow Up Arrow Down
Increases or decreases the heating value
on the home screen.
Cooling Hold
Indicates that cooling hold mode is
enabled. Hold mode is disabled by pressing
the button.
Heating Hold
Indicates that heating hold mode is
enabled. Hold mode is disabled by pressing
the button.
Table 3: Touchscreen icons (Part 2 of 4)
Icon and icon name Description

Johnson Controls TEC3000 Series Specifications

General

Brand	Johnson Controls
Model	TEC3000 Series
Category	Thermostat
Language	English