E n g l i s h --- 2 5
115305026 Rev. 3 7/15/10
MAINTENANCE
Bevel gear
The bevel gear is filled with the right quan-
tity of grease at the factory. However, be-
fore using the machine you should check
that the bevel gear is filled three--quarters
full with grease. Use JONSRED special
grease.
The grease in the bevel gear does not nor-
mally need to be changed except if repairs
are carried out.
Air filter
The air filter must be regularly cleaned to
remove dust and dirt in order to avoid:
S Carburetor malfunctions
S Starting problems
S Loss of engine power
S Unnecessary wear to engine parts
S Excessive fuel consumption
Clean the filter every 25 hours, or more
regularly if conditions are exceptionally
dusty.
Cleaning the air filter
Remove t he air filter cov er and ta ke out the
filter. Wa sh it clean in warm, soapy water.
Rinse thoroughly . Ensure that the filter is dry
before refitting it.
An air filter that has been in use for a long
time cannot be cleaned completely. The
filter must therefore be replaced with a new
one at regular intervals. A damaged air
filter must always be replaced.
To Next Page
Loading...
Need help?
General
