6 Maintenance
6.4 Disposal instructions for lubricants
The manufacturer of the lubricant will supply the disposal instruc-
tions for the lubricants used.
The following applies to grease delivered ex works:
Dispose of as special waste, disposal key no. 120 112 EAK
PCB content: free from PCB
Halogen content: free from halogen
6.5 Disposal instructions for landing gear
The installed parts are valuable raw materials that can be recycled.
They can be separated into plastic, rubber and metal materials.
Plastic and rubber are labelled in accordance with VDA Recom-
mendation 260.
Before disposal, clean parts to remove any residual oil or grease.
EN
Modul B & OPTIMA MUB 006 003 M01 (REV-A) 07-2020 13
To Next Page
Loading...
Need help?
General