JUKI DDL-555-4 User Manual

V.HOW TO USE AND ADJUST THE SWITCH-BACK BUTTON
1. Forming the switch-back stitches
Swi tch-back
button
Push tiie switch-back button, and the
machine will perform a reverse feed to
form the switch back stitches.
As long as the button is kept pressed, the
machine will perform the reverse feed.
As soon as the button is released, the
machine will reversed to the normal feed.
When you sew the half stitches, use the
reverse feed control lever.
2. Adjusting the position of the switch-back lever
I You may change the position of the switch
back button C1 to a suitable height for your
operation.
Loosen the screw (2) , move the switch lever
ij f up and down and obtain a suitable height.
DK Tighten the screw firmlyafter adjustment.
3. Adjusting the reverse stitch length
An excessive length of reverse stitch is usually
formed by the operator until he gets used to
operate this new device. In such a case, it would
be advisable to shorten the seam line with the
reverse feed by decreasing the stitch length of
reverse feed in comparison with the stitch
length with the normal feed, if it is permissible.
To lessen the length of the reverse stitch, loosen
the screw (I) and push up the stopper plate
d). If you push it down to the normal and
reverse feeds are identical.
- 29 -
From the library of: Superior Sewing Machine & Supply LLC

JUKI DDL-555-4 Specifications

General

Brand	JUKI
Model	DDL-555-4
Category	Sewing Machine
Language	English