– 23 –
5. Digital types operation
(1) Comparison Table of LCD Display Fonts and Actual Fonts
Arabic Numerals：
Actual 0 1 2 3 4 5 6 7 8 9
Display
Actual A B C D E F G H I J K L M
Display
Actual N O P Q R S T U V W X Y Z
Display
(2) Digital Display on the Key Board
English Alphabet
6. User Parameter & Technician Parameter
Parame-
ter code
Parameter function Range/ unit Default Key Description
P01
Maximum sewing
speed (sti/min)
100 to 4000 3500
Maximum speed of machine sewing
P02
Speed curve adjust-
ment(%)
1 to100% 80
The lager the value, the faster to increase
speed
p03
Needle UP/ DOWN
uP / DN DN
Up: Needle stops at up position
Dn: Needle stops at down position
p04
Start back-tacking
speed (sti/min)
200 to 3200 1900
Start Back-Tacking speed adjustment
P05
End back-tacking
speed (sti/min)
200 to 3200 1900
End Back-Tacking speed adjustment
P06
Bar-tacking speed
(sti/min)
200 to 3200 1900
Repeat Bar-Tacking speed adjustment
P07
Soft start speed (sti/
min)
200 to 1500 800
Soft Start speed adjustment
P08
Stitch numbers for
soft start(sls)
0 to 99 Stitch-
es
4
Soft Start stitches setting (one unit = half
stitch)
P09
Automatic con-
stant-stitch sewing
speed (sti/min)
200 to 4000 3500
Constant-Stitch sewing speed [034.SMP] is
set at A(or when one shot signal is active)
P10 Automatic end
back-tacking sew-
ing(can invalidate
the stitch correction
function)
ON / OFF ON The Stitch-Correction is valid in sewing stop.
Note : Valid only when the【0.11.RVM】must
set on B
ON : Invalid (Constant-Stitch sewing, it can
automatic continue action as CD func-
tion)
OFF : Valid (Can’t continue execute CD func-
tion)
To Next Page
Need help?
General
