S : Micro-quantity lubrication
M : Semi-dry
D : Dry
DDL-9000B-
S :
Medium-weight materials
H : Heavy-weight materials
A : Light weight materials
SPECIFICATIONS
-SH -MA
*3
4,500 sti/min 5,000 sti/min
Thread trimming
speed
500 sti/min (100 to 500sti/min)
Stitch length 5mm
*1
4mm
Presser foot lift
(by knee lifter)
10 mm (standard) 15 mm (max.)
Needle
*2
1738 Nm65 to 110
(DB×1 #9 to 18)
1738 Nm125 to 160
(DB×1 #20 to 23)
1738 SAN10 Nm60 to 75
(DB×1 SF#8 to 11)
134 Nm65 to 110
(DP×5 #9 to 18)
134 Nm125 to 160
(DP×5 #20 to 23)
134 Nm60 to 75
(DP×5 #8 to 11)
Lubricating oil
JUKI NEW DEFRIX OIL No. 1
or JUKI MACHINE OIL #7
- JUKI NEW DEFRIX OIL No. 1
or JUKI MACHINE OIL #7
SS, MS, MA ;
'- Equivalent continuous emission sound pressure level (L
pA
) at the workstation:
2.5 dBA) ; according to ISO 10821- C.6.2 -ISO
'- Equivalent continuous emission sound pressure level (L
pA
) at the workstation:
2.5 dBA) ; according to ISO 10821- C.6.2 -ISO
'- Equivalent continuous emission sound pressure level (L
pA
) at the workstation:
2.5 dBA) ; according to ISO 10821- C.6.2 -ISO
-SS -MS -DS
M a x . s e w i n g
5,000sti/min 4,000 sti/min
speed
A-weighted value of 77 dBA ; (Includes K
pA
=
11204 GR2 at 4,000 sti/min.
SH ;
Noise
A-weighted value of 77 dBA ; (Includes K
pA
=
11204 GR2 at 4,000 sti/min.
DS ;
A-weighted value of 79 dBA ; (Includes K
pA
=
11204 GR2 at 4,000 sti/min.
• The sewing speed will vary depending on the sewing conditions. The sewing speed preset at the time of shipping is 4,000sti/
min. The thread trimming speed can be changed within the range of ( ). The thread trimming speed preset at the time of
shipping is 500sti/min.
*
1
: When stitch length exceeds 4 mm or more, set the max. sewing speed to 4,000 sti/min or less for use.
*
2
: Needle used depends on the destination.
*
3
: MA type is for light-weight materials. In the case the sewing machine is used with its speed of stitch set at 4,000 sti/min
or higher, the presser regulating spring and thread tension spring should be changed with S type ones.
– 1 –
To Next Page
Need help?
General
