16
DROP FEED LEVER
The drop feed lever the movement of the fabric that is
being sewn. They should be raised for all general sewing
purposes and lowered for darning, freehand embroidery
and monogramming so that you, and not the feed dogs,
are moving the fabric.
CONVERTING TO FREE-ARM SEWING
Your machine can be used either as a flat-bed, or as a
free-arm model.
With the auxiliary bed in position, it provides a large
working surface as a standard flat-bed model.
By removing the auxiliary bed (just pull it off to the left as
shown), the machine converts into a free-arm model.
REVERSE STITCH LEVER
It is recommended to begin, or end seams with several
stitches in reverse for reinforcement. As long as you are
pressing down this lever while sewing, the machine will
continue to feed the fabric backwards.
Reverse stitch lever
Palanca puntada de retroceso
To Next Page
Loading...
Need help?
General
