Buttonhole sewing to match the
size of the button is possible.
For stretch fabric or thin fabric,
it is recommended to use a
stabilizer for a better buttonhole
finish.
Buttonhole stitching
Mark the positions of the
buttonhole on the fabric.
The maximum buttonhole
length is 3cm (1 3/16 inch).
(Total of diameter + thickness of
button.)
Attach the buttonhole foot, then
pull out the button holder plate
and insert the button.
The size of the buttonhole is
determined by the button
inserted in the button plate.
The thread should be passed
through the hole in the presser
foot, then be placed under the
foot.
3.0~7.0
0.3~1.0
3.0~5.5
0.3~1.0
5.5~7.0
0.3~1.0
3.0~7.0
1.0~2.0
D
16
17
19
18
20
Note:
Before sewing a buttonhole
on your project, practice on a
scrap piece of the same type
of fabric.
16
17
18
19
20
For thin or medium fabric
For horizontal holes on
blouses or shirts made
from thin or medium fabric
For suits or overcoats
For thin or medium fabric
For jeans or stretch fabric
with a coarse weave
To Next Page
Loading...
Need help?
General
