38
4.13. Setting the presser foot pressure
Set the presser foot pressure by pressing the icon.
(Setting range: 0 - 5)
Set the presser foot pressure to “3.6” (initial value) in the
case of standard stitching.
Set the presser foot pressure to a smaller value (decrease
the presser foot pressure) in the case of sewing light-weight
synthetic materials or elastic materials, and sewing appli-
que, quilt and curve sections of materials, since in that case
uneven material feed is likely to occur.
Press
.
The set value is conrmed by pressing .
The presser foot
pressure is decreased.
The presser foot
pressure is increased.
The presser foot pressure
will be returned to its
initial value by pressing
the blue frame.
The presser foot pressure
can also be adjusted by
sliding the slide bar to the
right or left.
To Next Page
Loading...
Need help?
General
