−13 −
Standard Adjustment
Thread trimming
position (40 pulses)
3) Needle thread trimming adjustment mode
* When entering the adjustment
mode, the position is in the state
of origin position.
Needle thread trimming adjustment mode motion
/ Thread holding position / Thread release position / Waiting position / Thread trimming position
Thread release
position (-86 pulses)
Thread holding
position (0 pulse)
Origin
position
Waiting position
(10 pulses)
Latch
Cam groove
end
Roller
Roller
Cam groove end
Thread release position Thread trimming position
To Next Page
Loading...
Need help?
General
