JUKI LBH-782 User Manual

12. REDUCTION OF
SEWING SPEED AND
EMERGENCY STOP
11. THREADING THE NEEDLE-THREAD
r©/. --
1. Pass the needle thread in the order as shown in the figures.
2. The threading can be done easily by using the needle threader
supplied with the machine.
•k Reduction of sewing speed
1. Turn hand stop crank O downwards to position
O, and
2. the machine will be immediately slowed down.
★ Emergency stop
1. Turn the hand stop crank downwards to position
o , and further upwards to position © and
2. the machine will stop immediately.
(NOTE) When the hand stop crank do not return,
push It down.
13. MANUAL FEED HANDLE
14. HOW TO HOLD THE
DESCENDIIMG KNIFE
m
When you wand to feed fabric manually after giving an emergency
stop or to resume sewing from the point at which thread was
broken, rotate manual feed handle O to operate the cloth feeding
mechanism.
(NOTE) Confirm that the needle does not stick in fabric before
turning the manual feed handle.
When you do , not want to cut fabric after sewing
because of thread breakage or some other reasons,
keep on pressing down knife stop lever O lightly
until the machine stops. Then the knife will not
descend.
15. TYPES OF STITCHES
(Whip stitch)
mmwmmimmimMimm
Pallarel side seam Bar tacking seam
(Purl stitch)
This machine is capable of forming two different types of
stitches, namely whip stitch and purl stitch.
(Whip stitch)
The whip stitch is formed in zigzag showing the needle
thread only on top of fabric, and the bobbin thread on the
bottom.
(Purl stitch)
When applying higher tension to the needle thread to permit
it to pass straight through fabric, the purl stitch is formed by
the bobbin thread which is pulled over from both sides to the
center line.
From the library of: Superior Sewing Machine & Supply LLC

JUKI LBH-782 Specifications

General

Brand	JUKI
Model	LBH-782
Category	Sewing Machine
Language	English