– 46 –
Standard Adjustment
Condition : Thread trimmer driving
plate comes in close
contact with the follower
installing base.
8) Connecting the left and right rocking arms (2-needle machine only)
Thread trimmer shaft
connecting plate
1
2
3
4
5
Condition : When the moving knife
is positioned to the initial
position. (Refer to
“™Initial position of 4)
Adjusting the knife
pressure”
9) Thread trimmer solenoid
0.05 to 0.15 mm
1
2
3
4
5
Close contact
Solenoid connecting arm
(9 to 10 mm)
Close contact
Moving knife shaft
connecting plate
Close contact
To Next Page
Loading...
Need help?
General
