JUKI LU-1510N User Manual

– 40 –
2) Position of the counter knife base
Standard Adjustment
3) Vertical position of the moving knife
™ Adjusting procedure of counter
knife base (right)
Counter knife gauge for both
1-needle and 2-needle
™ Adjusting procedure of counter
knife base (left)
1
2
3
1
2
3
1.5 mm
2mm
Dimension
Model
LU-1510N-7
LU-1511N-7
LU-1560N-7
LU-1561N-7
Dimension C
1.5.±0.2 mm
Dimension D
–
2±0.2 mm
Condition : Make the edge of counter knife
base come in contact with the
step difference of hook shaft
base.
Adjust at the center part.
Rocking arm
Dimension
Model
LU-1510N-7
LU-1511N-7
LU-1560N-7
LU-1561N-7
Left Right
2
3
4
3
0.3 to 0.4 mm
To contact
To contact
Dimension C
Dimension D
To contact
To contact
0.3 to 0.4 mm
1
Moving knife shaft

JUKI LU-1510N Specifications

General

Brand	JUKI
Model	LU-1510N
Category	Sewing Machine
Language	English