JUKI LU-2810 User Manual

–18–
17. THREAD TAKE-UP SPRING
(1) When you want to change the stroke of the
thread take-up spring
1) Loosenscrew
❷
.Adjustthreadtake-upspring
❶
bymovingitintheslot.
2) Loosenscrew
❹
.Adjustthreadtake-upspring
❸
bymovingthreadtake-upspringadjusting
plate
❺
alongthreadtake-upspringbase
❻
.
* The LU-2810 and -2810-7 do not have thread
take-up spring
❸
.
(2) When you want to change the tension of
the thread take-up spring
1) Toadjustthetensionofthreadtake-upspring
❶
,
loosennut
❼
rst.Turnspringshaft
❽
counter-
clockwisetoincreasethetensionorclockwise
todecreaseit.
 Aftertheadjustment,xthestudbytightening
nut
❼
.
2) Tochangethetensionofthreadtake-upspring
❸
,loosenscrew
❾
rst.Turnnut
󱢳
counter-
clockwisetoincreasethetensionorclockwise
todecreaseit.
 Aftertheadjustment,xnutbytighteningscrew
❾
.
* The LU-2810 and -2810-7 do not have thread
take-up spring
❸
.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
❷
❹
❻
❺
❸
❶
Decrease
Increase
󱢳
❼
❶
❸
❽
❾

JUKI LU-2810 Specifications

General

Brand	JUKI
Model	LU-2810
Category	Sewing Machine
Language	English