– 1 –
11
11
1.仕様
機種名称 高速シリンダーベッド飾り縫いミシン
型式 MF-7800 シリーズ
縫い目形式 ISO 規格 406、407、602、605
用途例 ニット、メリヤス製品へのヘム縫い、カバーリング縫い
最高縫い速度 最高毎分 6500 針(間欠運転時)
針幅 3 本針 --------- 5.6mm、6.4mm
2本針--------- 3.2mm、4.0mm、4.8mm
差動送り比 1:0.6 〜 1:1.8(縫い目長さ 2.5mm 以下)
微量差動送り調節機構装備(マイクロアジャスト)
縫い目長さ 0.9mm 〜 3.6mm(調整により 4.5mm まで可)
使用針
UY128GAS # 9S 〜# 14S(標準# 10S)
針棒ストローク 31mm
外観寸法 高さ:450 ×左右:456 ×前後:267
質量 42kg
押え上昇量 6mm(針幅 5.6mm上飾りなし)、5mm(上飾り付き)
微量押え上げ機構装備
送り調節方法 主送り -------------- ダイヤル式縫目ピッチ調節方式
差動送り ----------- レバー調節方式(マイクロアジャスト機構装備)
ルーパー機構 球面ロッド駆動方式
潤滑方法 ギアポンプによる強制潤滑給油方式
潤滑油 JUKIMACHINEOIL18
貯油量 オイルゲージ下線 600cc〜上線 900cc
据付け方法 上乗せ式
Model name High-speed, cylinder-bed coverstitch machine
Model MF-7800 series
Stitch type ISO standard 406, 407, 602, and 605
Example of application Hemming and covering for knits and general knitted fabrics
Max. sewing speed Max. 6,500 rpm (at the time of intermittent operation)
Needle gauge 3-needle ... 5.6 mm and 6.4 mm
2-needle ... 3.2 mm, 4.0 mm and 4.8 mm
Differential feed ratio 1 : 0.6 to 1 : 1.8 (stitch length : less than 2.5 mm)
Micro-differential feed adjustment mechanism is provided. (Micro-adjustment)
Stitch length 0.9 mm to 3.6 mm (can be adjusted up to 4.5 mm)
Needle UY128GAS #9S to #14S (standard #10S)
Needle bar stroke 31mm
Dimensions (Height) 450 x (Width) 456 x (Length) 267
Weight 42 kg
Lift of presser foot 6 mm (needle gauge : 5.6 mm without top covering), and 5 mm (with top covering)
Micro-lifter mechanism is provided.
Feed adjustment method Main feed ... dial type stitch pitch adjustment method
Differential feed ... lever adjustment method (micro-adjustment mechanism is provided.)
Looper mechanism Spherical rod drive method
Lubricating system Forced lubrication method by gear pump
Lubricating oil JUKI MACHINE OIL 18
Oil reservoir capacity Oil gauge lower line : 600 cc to upper line : 900 cc
Installation Top mount type
Noise Workplace-related noise at sewing speed
n= 5,000 min
-1
: LPA ≦ 78 dB (A)
Noise measurement according to DIN 45635-48-A-1.
11
11
1. SPECIFICATIONS